COLD DRAWN WIRES (Stainless & Alloy Steel)

Size Dia 0.10 mm to 8.00 mm (0.0039" to 0.315")

Tolerance
h9 or as per specific requirement.

Surface Finish
Bright Drawn, Bright Shiny, EPQ, Coated, Lightly Coated.

Tensile Strength
Soft annealed, ¼ hard, ½ hard, full hard.

Grade
Austenitic: 301,302,303,304,304L, 304HC, 302HQ, 302CU, 304S, 316, 316L, 316S, 304LER, 309LER, 316LER, 308LER, 321,316TI, 201, 202, 201Cu, 204Cu etc.

Ferritic/Martens tic: 410,420, 430, 430L, 420C, 416, 430F etc.

Specification:
Standard Tolerance on wire diameter
Diameter Tolerance
0.20 mm (0.0078") to < 0.37 mm (0.0145") +/- 0.005 mm (0.0002")
0.37 mm (0.0145") to < 0.50 mm (0.0197") +/- 0.010 mm (0.0004")
0.50 mm (0.0197") to < 1.25 mm (0.0492") +/- 0.012 mm (0.0005")
1.25 mm (0.0492") to < 2.00 mm (0.0787") +/- 0.015 mm (0.0006")
2.00 mm (0.0787") to < 3.25 mm (0.1280") +/- 0.020 mm (0.0008")
3.25 mm (0.1280") to < 4.75 mm (0.1870") +/- 0.025 mm (0.0010")
4.75 mm (0.1870") to < 8.00 mm (0.3150") +/- 0.040 mm (0.0015")


Jenith Alloy Steels has composite Steel making facilities which includes Steel Melting, Wire Rod Rolling, Wire Drawing and Bright Bar making. Stainless Steel Cold Drawn Wires